3 Inch DAISHIN HONDA SCR-80HP Water Pump GP160

3 inch 5.5hp Farm Irrigation Gasoline Petrol Water Pump Machine with an inlet and outlet of 80mm,its other details followInlet / Outlet: 80mmTotal Lift: 28m Max suction: 7m Max Capacity:1000 L/min Engine Model: TE160 Max Output: 5.5 Hp Displacement: 163cc Noise Level at 7m - 65dB Starting System Recoil Engine Type Forced air-cooled Ignition System - Non-contact transistorized ignition (T.C.I) Fuel tank: 3.6 Oil Capacity: 0.6.get the best water pump and a good quality T

• Inlet / Outlet: 80mm
• Total Lift: 28m
• Max suction: 7m
• Max Capacity:1000 L/min
• Engine Model: TE160
• Max Output: 5.5 Hp
• Displacement: 163cc
• Noise Level at 7m - 65dB
• Starting System Recoil
• Engine Type Forced air-cooled

The Solar-Powered direct water pump Kit is conveniently powered by energy from sunlight, no external batteries or electricity needed. The solar water pump has a Water output of 1500 L/Hr,  can  do  50 Metres pull depths ( Best for up to 150 feet well/borehole).

• Large Flow Submersible Pump
• Voltage: 24V DC
• Input Power: 250W
• Max Flow: 1500L/H, 25 litres per minute
• Max Head: 50m or 98ft
• Excellent Performance
• Industrial grade heavy duty stainless steel body
• Can be mounted vertically or horizontally
• Easy to Install
• Can work with solar panel from 100W to 400W depending on the amount of water required
• Can also be operated using a 24V battery.
• Multiple applications: Suitable for deep wells, rivers, reservoirs, canals and other water lifting works.
• The ideal solution for remote watering needs without electric power, like garden, farm irrigation and tank filling etc

The Total peripheral booster water pump 0.5HP is a robust, reliable and economical pump used principally for water transfer in domestic and small scale water transfer applications. The pump body is made from cast iron with a brass insert set into the front housing for improved starting performance and protection from jamming. The impeller is made from brass. The pumps have been remodeled and re-engineered offering the following benefits;

• Quiet operation due to the anti vibration system between shaft and impeller
• More compact
• More efficient motor with low energy consumption and lower operating temperature.
• Special paint which gives improved resistance against environmental corrosion
• Longer life

  Pumps can be installed for manual or automatic control using either the unique ‘Press control’ unit or a pressure tank and switch. Also available is the integral ‘Hydrofresh’ version which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop.

MOTOR

Pumps are close coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.