Pedrollo WATER PUMP 0.5 HP ITALY PKM60
Original price was: KSh 9,500.00.KSh 7,999.00Current price is: KSh 7,999.00.
The Original Pedrollo PKm60 is a robust, reliable and economical pump used principally for water transfer in domestic and small scale water transfer applications. The pump body is made from cast iron with a brass insert set into the front housing for improved starting performance and protection from jamming. The impeller is made from brass.
Pumps can be installed for manual or automatic control using either the unique ‘Presscontrol’ unit or a pressure tank and switch. Also available is the integral ‘Hydrofresh’ version (Pkm60 only) which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop.
MOTORPumps are close coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.
The Original Pedrollo PKm60 is a robust, reliable and economical pump used principally for water transfer in domestic and small scale water transfer applications. The pump body is made from cast iron with a brass insert set into the front housing for improved starting performance and protection from jamming. The impeller is made from brass.
Pumps can be installed for manual or automatic control using either the unique ‘Presscontrol’ unit or a pressure tank and switch. Also available is the integral ‘Hydrofresh’ version (Pkm60 only) which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop.
MOTORPumps are close coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.
Related products
24V 250W HIGH LIFT SUBMERSIBLE DIRECT SOLAR PUMP CONNECTION DC, Solar Silver
Daichi 3 INCH WATER PUMP PETROL HIGH PRESSURE
Dayliff DDW 400S Drainage Pump
- The DAYLIFF DDW submersible pump range are centrifugal submersible pumps designed for small scale drainage, irrigation, fountain and water transfer applications. Two versions are available, the standard S version with open impeller for lightly turbid water and the vortex version for water with higher silt loads.Pump construction is of high strength engineering plastic for the pump casing, suction base and impeller and an external float switch is provided for automatic pump control. All pumps are supplied with 5m of waterproof power cable and a union connected outlet suitable for threaded or hose connection.
- MOTOR
- Pumps are provided with intergral non-overloading induction motors designed for continuous operation. A thermal cut-out is provided in the motor winding to protect against pump overload and the pump can be connected directly to the mains power supply through a 10A fuse or MCB.
Generic Automatic Pump Control Booster Water Pump Pressure Controller Press Gauges
- Starts pump when flow is sensed (minimum 2.4 litres/min) and stops when flow ceases.
- Pump stop time adjustable between 10 to 180 secs.
- System is un-pressured in no flow condition so eliminating pump cycling
- Easy to operate with simple push button controls.
- Led lights indicate the functioning of the pump.Automatically stops if no water is in the pump.
Honda 2″ (inch) Water Pump
Honda Water Pump 2″ Petrol Water Pump 7HP
K-Maxx Quality WATER PUMP 3 Inch 5.5hp Petrol Water Pump
- Inlet / Outlet: 80mm
- Total Lift: 28m
- Max suction: 7m
- Max Capacity:1000 L/min
- Engine Model: TE160
- Max Output: 5.5 Hp
- Displacement: 163cc
- Noise Level at 7m - 65dB
- Starting System Recoil
- Engine Type Forced air-cooled
K-Maxx Quality WATER PUMP 3 Inch 5.5hp Petrol Water Pump
- Inlet / Outlet: 80mm
- Total Lift: 28m
- Max suction: 7m
- Max Capacity:1000 L/min
- Engine Model: TE160
- Max Output: 5.5 Hp
- Displacement: 163cc
- Noise Level at 7m - 65dB
- Starting System Recoil
- Engine Type Forced air-cooled
RUTANPUMP Solar Water Pump DC 24V 2m³/h 250W Submersible Solar Pump 50M HEAD
- Large Flow Submersible Pump
- Voltage: 24V DC
- Input Power: 250W
- Max Flow: 1500L/H, 25 litres per minute
- Max Head: 50m or 98ft
- Excellent Performance
- Industrial grade heavy duty stainless steel body
- Can be mounted vertically or horizontally
- Easy to Install
- Can work with solar panel from 100W to 400W depending on the amount of water required
- Can also be operated using a 24V battery.
- Multiple applications: Suitable for deep wells, rivers, reservoirs, canals and other water lifting works.
- The ideal solution for remote watering needs without electric power, like garden, farm irrigation and tank filling etc
Reviews
There are no reviews yet.