“RUTANPUMP Solar Water Pump DC 24V 2m³/h 250W Submersible Solar Pump 50M HEAD” has been added to your cart. View cart
3 Inch DAISHIN HONDA SCR-80HP Water Pump GP160
KSh 80,000.00 Original price was: KSh 80,000.00.KSh 49,990.00Current price is: KSh 49,990.00.
DAISHIN HONDA SCR-80HX Water Pump 3 inches GX160
KSh 90,000.00 Original price was: KSh 90,000.00.KSh 51,995.00Current price is: KSh 51,995.00.
DAISHIN HONDA SCR-50HX 2 Inches Water Pump GX160
KSh 80,000.00 Original price was: KSh 80,000.00.KSh 47,250.00Current price is: KSh 47,250.00.
- High-Efficiency 2-Inch Water Pump – Delivers strong water flow for irrigation, drainage, and general transfer tasks
- Powered by Honda GX160 Engine – Renowned for durability, fuel efficiency, and consistent performance even in tough conditions
- Impressive Flow Rate – Capable of pumping up to 520–1000 L/min for fast and reliable operation
- Strong Suction & Lift Capacity – Effectively draws water from wells, rivers, and tanks with stable pressure output
- Compact & Portable Design – Easy to transport and deploy across farms, construction sites, and remote areas
- Heavy-Duty Construction – Built with durable components for long-lasting use and resistance to wear
Category: water pump
Tag: 2 inches Daishin Honda water pump
Description
The SCR-50HX Daishin Honda Water Pump is a powerful 2-inch centrifugal pump powered by a reliable GX160 engine, designed for efficient water transfer and irrigation. It offers high flow performance and durability for both agricultural and industrial applications.
Specifications
- Model: SCR-50HX
- Pump Type: Centrifugal Water Pump
- Engine Model: Honda GX160
- Engine Type: 4-Stroke, Air-Cooled, OHV
- Engine Power: Approx. 5.5HP
- Inlet/Outlet Diameter: 2 inches (50mm)
- Maximum Flow Rate: 520–1000 L/min
- Maximum Head: Approx. 28–42 meters
- Suction Head: Up to 8 meters
- Fuel Type: Petrol (Gasoline)
- Starting System: Recoil Start
- Pump Material: Cast iron impeller and durable casing
- Frame Type: Protective heavy-duty frame
- Application: Clean and slightly dirty water pumping
Why Choose the SCR-50HX Daishin Water Pump?
- Trusted Honda GX160 engine reliability
- High water output for efficient operations
- Durable build for long-term heavy-duty use
- Fuel-efficient and cost-effective performance
- Easy to operate, maintain, and transport
Applications
- Agriculture – Ideal for irrigation, crop watering, and transferring water between storage systems
- Construction – Suitable for dewatering foundations, trenches, and job sites
- Domestic Use – Effective for draining flooded areas and household water transfer
- Commercial Use – Supports water movement in industrial and business environments
Reviews (0)
Be the first to review “DAISHIN HONDA SCR-50HX 2 Inches Water Pump GX160” Cancel reply
Shipping & Delivery
Related products
24V 250W HIGH LIFT SUBMERSIBLE DIRECT SOLAR PUMP CONNECTION DC, Solar Silver
The Solar-Powered direct water pump Kit is conveniently powered by energy from sunlight, no external batteries or electricity needed. The solar water pump has a Water output of 1500 L/Hr, can do 50 Meters pull depths (Best for up to 150 feet well/borehole).
OTHER FEATURES:
Can pump water from a river at 2000 l/hr with fairly sloppy area for 3 kilometers
No need for battery and solar controller
Can work with solar panels only (2 panels of 150 watts)
Can pump water from fairly sloppy area to 3 Kilometers
Horse pump 1.5 hp
Does not need a controller
Should NOT be used with inverter
Can go dry without damage i.e no need for float switch
Product has a life span of 15-20Years
Solar-powered submersible pump suitable for wells and boreholes 4 inch diameter or larger.
No need for solar charge controller, i.e. connect the two wires of the pump directly to solar panel.
No need for float switch. The pump can run dry without damage. Profile
This pump is best for small/Medium sale use i.e where water requirement is between 10,000 to 15,000 liters per day.
Very good for irrigation.
Dayliff DDW 400S Drainage Pump
- The DAYLIFF DDW submersible pump range are centrifugal submersible pumps designed for small scale drainage, irrigation, fountain and water transfer applications. Two versions are available, the standard S version with open impeller for lightly turbid water and the vortex version for water with higher silt loads.Pump construction is of high strength engineering plastic for the pump casing, suction base and impeller and an external float switch is provided for automatic pump control. All pumps are supplied with 5m of waterproof power cable and a union connected outlet suitable for threaded or hose connection.
- MOTOR
- Pumps are provided with intergral non-overloading induction motors designed for continuous operation. A thermal cut-out is provided in the motor winding to protect against pump overload and the pump can be connected directly to the mains power supply through a 10A fuse or MCB.
Dayliff DDW 400S Drainage Pump
- The DAYLIFF DDW submersible pump range are centrifugal submersible pumps designed for small scale drainage, irrigation, fountain and water transfer applications. Two versions are available, the standard S version with open impeller for lightly turbid water and the vortex version for water with higher silt loads.Pump construction is of high strength engineering plastic for the pump casing, suction base and impeller and an external float switch is provided for automatic pump control. All pumps are supplied with 5m of waterproof power cable and a union connected outlet suitable for threaded or hose connection.
- MOTOR
- Pumps are provided with intergral non-overloading induction motors designed for continuous operation. A thermal cut-out is provided in the motor winding to protect against pump overload and the pump can be connected directly to the mains power supply through a 10A fuse or MCB.
Dayliff DDW 400S Drainage Pump
- The DAYLIFF DDW submersible pump range are centrifugal submersible pumps designed for small scale drainage, irrigation, fountain and water transfer applications. Two versions are available, the standard S version with open impeller for lightly turbid water and the vortex version for water with higher silt loads.Pump construction is of high strength engineering plastic for the pump casing, suction base and impeller and an external float switch is provided for automatic pump control. All pumps are supplied with 5m of waterproof power cable and a union connected outlet suitable for threaded or hose connection.
- MOTOR
- Pumps are provided with intergral non-overloading induction motors designed for continuous operation. A thermal cut-out is provided in the motor winding to protect against pump overload and the pump can be connected directly to the mains power supply through a 10A fuse or MCB.
Generic Automatic Pump Control Booster Water Pump Pressure Controller Press Gauges
An in-line pump controller for automatic operation by flow sensing and suitable for boosting from header tanks. Features include:-
- Starts pump when flow is sensed (minimum 2.4 litres/min) and stops when flow ceases.
- Pump stop time adjustable between 10 to 180 secs.
- System is un-pressured in no flow condition so eliminating pump cycling
- Easy to operate with simple push button controls.
- Led lights indicate the functioning of the pump.Automatically stops if no water is in the pump.
Honda 2″ (inch)Petrol Water Pump
Honda Water Pump 2″ Petrol Water Pump 7HP
Honda Water Pump 2″ Petrol Water Pump 7HP
K-Maxx Quality WATER PUMP 3 Inch 5.5hp Petrol Water Pump
3 inch 5.5hp Farm Irrigation Gasoline Petrol Water Pump Machine with an inlet and outlet of 80mm,its other details followInlet / Outlet: 80mmTotal Lift: 28m
Max suction: 7m
Max Capacity:1000 L/min
Engine Model: TE160
Max Output: 5.5 Hp
Displacement: 163cc
Noise Level at 7m - 65dB
Starting System Recoil
Engine Type Forced air-cooled
Ignition System - Non-contact transistorized ignition (T.C.I)
Fuel tank: 3.6
Oil Capacity: 0.6.get the best water pump and a good quality T
- Inlet / Outlet: 80mm
- Total Lift: 28m
- Max suction: 7m
- Max Capacity:1000 L/min
- Engine Model: TE160
- Max Output: 5.5 Hp
- Displacement: 163cc
- Noise Level at 7m - 65dB
- Starting System Recoil
- Engine Type Forced air-cooled
Pedrollo WATER PUMP 0.5 HP ITALY PKM60
The Original Pedrollo PKm60 is a robust, reliable and economical pump used principally for water transfer in domestic and small scale water transfer applications. The pump body is made from cast iron with a brass insert set into the front housing for improved starting performance and protection from jamming. The impeller is made from brass.
Pumps can be installed for manual or automatic control using either the unique ‘Presscontrol’ unit or a pressure tank and switch. Also available is the integral ‘Hydrofresh’ version (Pkm60 only) which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop.
MOTORPumps are close coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.

Reviews
There are no reviews yet.