Showing all 28 results
0.5HP AC Single Phase Deep Well Pump Control Box
- Type: Control box for single-phase AC deep well (submersible) pumps
- Pump rating: 0.5 HP (approx. 0.37kW)
- Voltage: 220V-240V, single phase
- Protection: Overload and thermal protection
- Capacitor: Built-in
- Ingress protection: IP44 (as marked on the label)
- Housing: Durable, weather-resistant casing
- Supply cable: Fitted with plug
0.5HP Aico Japan AKP60 Peripheral Booster Water Pump 30m Head
0.5Hp BTALI BT QDX 1.5-17-0.37F Clean Water Submersible Pump
- Brand: BTALI
- Model: BT QDX 1.5-17-0.37F
- Type: Clean water submersible pump
- Power: 0.5HP (0.37kW)
- Outlet: 1 inch
- Max Head: 17m
- Rated Flow: 1.5 m³/h
- Power Supply: Single phase, 220-240V, 50Hz
- Float Switch: Included for automatic on/off
- Body: Cast iron, orange coated finish
- Cable: Power cable with 3-pin plug
0.5HP Freevel QB-60 Electric Booster Water Pump
1HP AC Single Phase Deep Well Pump Control Box
- Type: Control box for single-phase AC deep well (submersible) pumps
- Pump rating: 1 HP (approx. 0.75kW)
- Voltage: 220V-240V, single phase
- Protection: Overload and thermal protection
- Capacitor: Built-in
- Ingress protection: IP44 (as marked on the label)
- Housing: Durable, weather-resistant casing
- Supply cable: Fitted with plug
1HP Aico Japan AKP80 Booster Pump
1Hp BTALI BT QDX 1.5-33-0.75F Clean Water Submersible Pump
- Brand: BTALI
- Model: BT QDX 1.5-33-0.75F
- Type: Clean water submersible pump
- Power: 1.0HP (0.75kW)
- Outlet: 1 inch
- Max Head: 33m
- Rated Flow: 1.5 m³/h
- Power Supply: Single phase, 220-240V, 50Hz
- Float Switch: Included for automatic on/off
- Body: Cast iron, orange coated finish
- Cable: Power cable with 3-pin plug
1HP Freevel 4SDM3/13 Deep Well Submersible Water Pump 85m Head
- Brand: Freevel
- Model: 4SDM3/13
- Type: 4-inch multistage submersible borehole pump
- Motor power: 1HP (0.75kW)
- Voltage and frequency: 220-240V, 50Hz, single phase
- Max head: approx. 85m
- Rated flow: approx. 3m³/h
- Pump diameter: 4 inch (fits 4" and larger boreholes)
- Outlet: approx. 1.25 inch
- Body: stainless steel
- Includes: control box and cable
2″ Aico Japan ADP20 Diesel Water Pump Engine – Normal Pressure 4HP
-
Brand: AICO JAPAN
-
Model: ADP20
-
Engine Power: 4.0 HP Air-Cooled Diesel Engine
-
Inlet / Outlet Size: 2 Inches (50mm)
-
Pressure Type: Normal Pressure
-
Maximum Flow Rate: 30 m³/h (500 L/min)
-
Max Head Lift: 25 – 38 Meters
-
Starting System: Manual Recoil Pull Start
-
Pump Body Material: Durable Heavy-Duty Cast Iron
-
Frame: Protective tubular steel roll cage frame
2″ Aico Japan ADP50 Normal Pressure Diesel Water Pump – 8HP
-
Brand: AICO JAPAN
-
Model: ADP50
-
Engine Power: 8.0 HP 4-Stroke Air-Cooled Diesel Engine (180F Series)
-
Inlet / Outlet Size: 2 Inches (50mm)
-
499Pressure Type: Normal Pressure
-
Maximum Flow Rate: ~25,000 to 30,000 Litres/Hour (25–30 m³/h)
-
Max Head Lift: 25 – 30 Meters
-
Suction Depth: 7 – 8 Meters
-
Starting System: Manual Recoil Pull Start
-
Frame: Heavy-Duty Tubular Steel Roll Cage
2HP AC Single Phase Deep Well Pump Control Box
- Type: Control box for single-phase AC deep well (submersible) pumps
- Pump rating: 2 HP (approx. 1.5kW)
- Voltage: 220V-240V, single phase
- Protection: Overload and thermal protection
- Capacitor: Built-in
- Ingress protection: IP44 (as marked on the label)
- Housing: Durable, weather-resistant casing
- Supply cable: Fitted with plug
2HP Aico Japan AKP200 Centrifugal Booster Pump
3″ AICO Japan ADP30 Diesel Water Pump – 7HP
3″ Aico Japan ADP90ZDHP High Pressure Diesel Water Pump – 16HP
-
Brand: AICO JAPAN
-
Model: ADP90ZDHP
-
Engine Power: 16.0 HP Air-Cooled 4-Stroke Diesel Engine
-
Inlet / Outlet Size: 3 Inches (80mm)
-
Pressure Type: High Pressure
-
Max Head Lift: Up to 100 Meters
-
Maximum Flow Rate: 42,000 Litres/Hour (42 m³/h)
-
Suction Lift: Up to 8 Meters
-
Pump Body: Heavy-Duty Red Cast Iron Impeller & Volute
-
Starting System: Manual Recoil Pull Start / Decompression Lever
-
Frame: Heavy-duty protective tubular steel roll cage
3″ Astramilano AMDP90ZDHP High Pressure Diesel Water Pump – 16HP
-
Brand: Astramilano
-
Model: AMDP90ZDHP
-
Engine Power: 16.0 HP Air-Cooled 4-Stroke Diesel Engine
-
Inlet / Outlet Size: 3 Inches (80mm)
-
Pressure Type: High Pressure
-
Max Head Lift: Up to 100 Meters
-
Maximum Flow Rate: 42,000 Litres/Hour (42 m³/h)
-
Suction Lift: Up to 8 Meters
-
Pump Body: Heavy-Duty Red Cast Iron Impeller & Volute
-
Starting System: Manual Recoil Pull Start / Decompression Lever
-
Frame: Heavy-duty protective tubular steel roll cage
3″ Hisaki Japan HKDP30E Keystart Diesel Water Pump – 7HP Engine Normal Pressure
-
Brand: Hisaki Japan
-
Model: HKDP30E
-
Engine Power: 7.0 HP Air-Cooled Diesel Engine (178F, 296cc)
-
Inlet / Outlet Diameter: 3 Inches (80mm)
-
Pressure Type: Normal Pressure
-
Maximum Flow Rate: 60,000 Litres/Hour (60 m³/h)
-
Head Lift: 26 - 30 Meters
-
Starting System: Key Start (Electric Ignition) & Manual Recoil Back-up
-
Battery: Included (Heavy-duty 12V starter battery mounted on frame)
-
Frame: Protective tubular steel roll cage
3″ Hisaki Japan HKDP90ZDHP High Pressure Diesel Water Pump – 16HP
-
Brand: Hisaki Japan
-
Model: HKDP90ZDHP
-
Engine Power: 16.0 HP 4-Stroke Air-Cooled Diesel Engine (192F)
-
Inlet / Outlet Size: 3 Inches (80mm)
-
Pressure Type: High Pressure
-
Max Head Lift: Up to 100 Meters
-
Maximum Flow Rate: 1,500 L/min (60 m³/h)
-
Pump Body Material: Heavy-Duty Red Cast Iron Impeller & Volute
-
Starting System: Manual Recoil Pull Start / Decompression Lever
-
Frame: Heavy-duty tubular steel roll cage frame
3″ Kato Germany KDP90ZDHP High Pressure Diesel Water Pump – 16HP
-
Brand: Kato Germany
-
Model: KDP90ZDHP
-
Engine Power: 16.0 HP 4-Stroke Air-Cooled Diesel Engine (192F)
-
Inlet / Outlet Size: 3 Inches (80mm)
-
Pressure Type: High Pressure
-
Max Head Lift: Up to 100 Meters
-
Maximum Flow Rate: ~1500 L/min (~90 m³/h)
-
Pump Body: Heavy-Duty Red Cast Iron Impeller & Volute
-
Starting System: Manual Recoil Pull Start / Decompression Lever
-
Frame: Heavy-duty reinforced tubular steel roll cage
3HP AC Single Phase Deep Well Pump Control Box
- Type: Control box for single-phase AC deep well (submersible) pumps
- Pump rating: 3 HP (approx. 2.2kW)
- Voltage: 220V-240V, single phase
- Protection: Overload and thermal protection
- Capacitor: Built-in
- Ingress protection: IP44 (as marked on the label)
- Housing: Durable, weather-resistant casing
- Supply cable: Fitted with plug
Freevel JET-100 1HP Electric Jet Water Pump 45m Head
Freevel JETS-100 1HP Stainless Steel Jet Water Pump
- Brand: Freevel
- Model: JETS-100 (Premium)
- Motor power: 750W (1HP)
- Voltage: 220-240V, 50Hz, single phase
- Pump head: stainless steel
- Motor body: cast aluminium, blue finish
- Type: self-priming jet pump (centrifugal with ejector)
- Inlet/Outlet: 1 inch
- Max head: approx. 40m
- Max flow: approx. 50L/min
- Max suction depth: approx. 8m
- Certification: CE, ISO9001
JTMAX JTGWP20 2″ Gasoline Water Pump 7.5HP
JTMAX JTGWP30 3″ Gasoline Water Pump 7.5HP
Kzubr KVP-60 600W Submersible Electric Vibration Water Pump
- Brand: Kzubr
- Model: KVP-60 (K10911)
- Type: Submersible Vibration Water Pump
- Power: 600W
- Power Supply: Single Phase, 220-240V, 50Hz
- Body: Durable Impact-Resistant Housing with Orange Finish
- Outlet: Hose Connection Outlet
- Power Cable: Long Rubber-Insulated Cable with Plug
- Pumping Method: Electromagnetic Vibration Diaphragm System
- Suitable For: Clean Water
SCR-50HP Daishin Honda 2″ Petrol Gasoline Water Pump
- Brand: Daishin
- Model: SCR-50HP
- Type: self-priming centrifugal irrigation and water transfer pump
- Engine: Honda GP160, 4-stroke, air-cooled petrol engine
- Engine displacement: 163cc
- Engine power: approx. 2.9kW (3.9HP) rated
- Inlet and outlet size: 2 inch (50mm)
- Max total head: approx. 50m
- Max suction lift: approx. 8m
- Max flow: approx. 400L/min
- Starting system: recoil (pull) start
- Fuel tank capacity: approx. 3.1L
- Frame: heavy-duty tubular steel roll cage
- Pump casing: aluminium, with cast-iron impeller
- Pump type: clean-water pump
Total TWP93706 0.5HP (370W) Automatic Self-Priming Peripheral Water Pump
Windsor 7.5HP Petrol High Pressure Water Pump
WP50P Jialing Honda Water Pump 2″ Engine GP160
- Brand: Jialing
- Model: WP50P
- Type: self-priming centrifugal clean-water pump
- Engine: Honda GP160, 4-stroke, air-cooled petrol engine
- Engine displacement: 163cc
- Engine power: approx. 3.6kW (4.8HP) max
- Inlet and outlet size: 2 inch (50mm)
- Max flow: approx. 550L/min
- Max total head: approx. 35m
- Max suction lift: approx. 8m
- Starting system: recoil (pull) start
- Fuel: unleaded petrol
- Frame: heavy-duty tubular steel roll cage with rubber feet
- Pump casing: aluminium