3″ x 30 Metres Green Suction Pipe
- Internal Diameter: 3 inches (76mm)
- Length: 30 Metres per roll
- Material: Virgin PVC (inner tube and outer cover)
- Reinforcement: Rigid PVC spiral helix
- Construction: Three-layer (inner tube, spiral reinforcement, outer cover)
- Pressure Rating: Up to 70 psi working pressure (approx. 4.8 bar)
- Safety Factor: 3:1
- Temperature Range: -5°C to 60°C
- Colour: Green
- Inner Surface: Smooth bore
- Compatible Fittings: Standard 3″ pump inlet fittings and camlock couplings
The Green Suction Pipe 3″ x 30M is a large-bore, high-performance PVC suction hose engineered for demanding, high-volume water transfer operations. With a 3-inch internal diameter, it delivers exceptional flow capacity to match the output of powerful 3″ petrol, diesel, and electric water pumps. The rigid PVC spiral helix reinforcement prevents collapse under heavy suction loads, while the smooth inner bore ensures maximum flow with minimal friction loss. Built for tough outdoor conditions, this 30-metre roll is the preferred choice for serious farming, large-scale irrigation, and heavy construction work.
Key Features & Benefits
- 3-Inch Large Bore for Maximum Flow — Significantly higher water throughput than smaller diameter hoses, ideal for high-powered pumps that require unrestricted inlet flow to operate at full capacity
- Rigid PVC Spiral Helix Reinforcement — Heavy-duty internal spiral prevents the hose from collapsing under the strong vacuum generated by large pumps, maintaining full suction at all times
- Smooth Inner Bore — Eliminates friction loss and prevents sediment accumulation along the pipe wall, ensuring fast, clean water delivery throughout the 30-metre length
- Flexible Despite Large Diameter — Engineered to remain manoeuvrable and easy to position even at 3 inches wide, reducing installation effort on site
- Corrosion & Chemical Resistant — Virgin PVC construction resists rust, corrosion, and exposure to mild chemicals, ensuring long service life in wet and outdoor environments
- UV & Weather Resistant — Outer green PVC cover is stabilised against UV degradation, maintaining structural integrity and flexibility through extended outdoor exposure
- Kink & Crush Resistant — Spiral reinforcement holds the pipe open under bending and coiling, preventing flow interruption during operation
- 30-Metre Roll Length — Provides substantial reach from pump to water source, reducing the need for multiple hose joins that can cause pressure loss
- Compatible with Standard Fittings — Fits directly onto 3″ pump inlets, camlock couplings, and standard irrigation connectors
Why Choose the Green Suction Pipe 3″?
- Matches the inlet requirements of 3″ water pumps — the most powerful pump class widely used in commercial farming and large construction projects
- Large bore maximises pump efficiency by ensuring the motor receives full, unrestricted water supply at all times
- Heavy-duty spiral reinforcement handles the stronger vacuum forces generated by large pumps without deformation
- 30-metre length provides excellent reach across wide farmlands, large construction sites, and deep water sources
- Durable virgin PVC construction delivers long service life with no maintenance required
Applications
Large-Scale Farm Irrigation — Draws high volumes of water from rivers, dams, and reservoirs to supply large irrigation systems, centre pivots, and extensive drip or sprinkler networks
Flood & Emergency Drainage — Rapidly removes large volumes of water from flooded fields, roads, construction sites, and low-lying areas using powerful pump setups
Water Transfer & Bulk Pumping — Moves large quantities of water quickly between holding tanks, storage reservoirs, boreholes, and distribution infrastructure
Construction & Civil Works — Supplies water at scale for concrete production, road construction, dust control, and site dewatering on major projects
Quarrying & Mining — Used to dewater quarry pits, mine shafts, and excavation sites where large volumes of groundwater accumulate
Commercial Livestock Operations — Rapidly fills large water troughs, holding ponds, and storage tanks on commercial dairy, beef, and poultry farms
Related products
1.5″ Clear Wired Suction Pipe 30M Roll
- Inner Diameter: 1.5 inches (38mm)
- Roll Length: 30 metres
- Material: High-quality PVC (Polyvinyl Chloride)
- Reinforcement: Rigid PVC-coated steel wire spiral helix embedded in flexible PVC wall
- Colour: Clear/transparent with blue and red indicator stripe
- Pressure Rating: Up to 6 bar (suction and discharge)
- Working Temperature Range: -10°C to +60°C
- Vacuum Rating: High suction resistance (crush-resistant design)
- Flexibility: High — flexible even under load
- Construction: Heavy-duty, multi-layer PVC with rigid spiral wire reinforcement
- Application: Water suction, transfer, and discharge
1.5″ x 30 metres Clear Steel Wire Suction Pipe
- Efficient Water Suction Performance – Designed for smooth, uninterrupted water flow in pumping systems
- Durable Steel Reinforcement – Strong construction resists collapsing, kinking, and wear during heavy use
- Transparent Design – Clear material allows easy monitoring of water flow and blockage detection
- Extended 30 Metre Length – Covers long distances, ideal for farms, construction, and irrigation setups
- Standard 1.5-Inch Diameter – Compatible with most common water pumps and fittings
- Weather & Corrosion Resistant – Suitable for outdoor use in various environmental conditions
1.5″ x 30 Metres Green Suction Pipe
- Internal Diameter: 1.5 inches (38mm)
- Length: 30 Metres per roll
- Material: Virgin PVC (inner tube and outer cover)
- Reinforcement: Rigid PVC spiral helix
- Construction: Three-layer (inner tube, spiral reinforcement, outer cover)
- Pressure Rating: Up to 70 psi working pressure (approx. 4.8 bar)
- Safety Factor: 3:1
- Temperature Range: -5°C to 60°C
- Colour: Green
- Inner Surface: Smooth bore
- Compatible Fittings: Standard pump inlet fittings and camlock couplings
2.5″ Clear Wired Suction Pipe 30M Roll
- Inner Diameter: 2.5 inches (63mm)
- Roll Length: 30 metres
- Material: High-quality PVC (Polyvinyl Chloride)
- Reinforcement: Rigid PVC-coated steel wire spiral helix embedded in flexible PVC wall
- Colour: Clear/transparent with blue and red indicator stripe
- Pressure Rating: Up to 4 bar (suction and discharge)
- Working Temperature Range: -10°C to +60°C
- Vacuum Rating: High suction resistance (crush-resistant design)
- Flexibility: Moderate — flexible under load with strong shape retention
- Construction: Heavy-duty, multi-layer PVC with rigid spiral wire reinforcement
- Application: Water suction, transfer, and discharge
2″ x 30 metres Clear Steel Suction Pipe
- High-Flow Water Suction Efficiency – Designed for smooth and consistent water transfer with minimal loss
- Steel Wire Reinforcement – Built with strong internal wiring to prevent collapsing under suction pressure
- Transparent Body Design – Allows easy monitoring of water flow and quick detection of blockages
- Long 30 Metre Length – Ideal for large-scale water movement in farms, construction, and industrial setups
- 2-Inch Wide Diameter – Supports high-volume water flow for efficient pumping operations
- Heavy-Duty Outdoor Use – Resistant to weather conditions and suitable for tough working environments
2″ x 30 Metres Green Suction Pipe
- Internal Diameter: 2 inches (50mm)
- Length: 30 Metres per roll
- Material: Virgin PVC (inner tube and outer cover)
- Reinforcement: Rigid PVC spiral helix
- Construction: Three-layer (inner tube, spiral reinforcement, outer cover)
- Pressure Rating: Up to 70 psi working pressure (approx. 4.8 bar)
- Safety Factor: 3:1
- Temperature Range: -5°C to 60°C
- Colour: Green
- Inner Surface: Smooth bore
- Compatible Fittings: Standard pump inlet fittings and camlock couplings
3″ Clear Wired Suction Pipe 30M Roll
- Inner Diameter: 3 inches (75mm)
- Roll Length: 30 metres
- Material: High-quality PVC (Polyvinyl Chloride)
- Reinforcement: Rigid PVC-coated steel wire spiral helix embedded in flexible PVC wall
- Colour: Clear/transparent with blue and red indicator stripe
- Pressure Rating: Up to 3.5 bar (suction and discharge)
- Working Temperature Range: -10°C to +60°C
- Vacuum Rating: High suction resistance (crush-resistant design)
- Flexibility: Moderate — strong shape retention with manageable flexibility
- Construction: Heavy-duty, multi-layer PVC with robust spiral wire reinforcement
- Application: Water suction, transfer, and discharge
3″ x 30 metres Clear Steel Suction Pipe
High-Flow Water Suction Efficiency – Designed to deliver smooth and consistent water transfer with minimal resistance, making it ideal for fast and efficient pumping over long distances
Steel Wire Reinforcement – Built with strong internal steel wiring that prevents the pipe from collapsing under high suction pressure, ensuring durability and stable performance during heavy-duty use
Transparent Body Design – Clear pipe structure allows easy visual monitoring of water flow, making it simple to detect blockages, air pockets, or impurities without dismantling the system
Long 30 Metre Length – Provides extended reach for large-scale operations, reducing the need for multiple joints and making it suitable for farms, construction sites, and industrial applications
3-Inch Wide Diameter – Supports very high water volume flow, making it ideal for heavy-duty pumping tasks that require fast and efficient water movement
Heavy-Duty Outdoor Durability – Made to withstand harsh environmental conditions, rough handling, and continuous outdoor use in agricultural and industrial settings
4″ x 30 metres Clear Steel Suction Pipe
High-Capacity Water Suction Efficiency – Designed for maximum water flow, the 4-inch diameter allows rapid transfer of large volumes of water, making it ideal for heavy-duty pumping applications
Steel Wire Reinforced Construction – Built with strong internal steel wiring that prevents the pipe from collapsing under high suction pressure, ensuring durability and consistent performance in demanding conditions
Transparent Body Design – Clear construction allows easy monitoring of water flow, helping users quickly detect blockages, air bubbles, or impurities without stopping operations
Extended 30 Metre Length – Provides long-distance reach for large-scale projects, reducing the need for multiple joints and making it suitable for extensive water transfer systems
4-Inch Wide Diameter – Supports extremely high water volume output, making it perfect for large irrigation systems, construction dewatering, and industrial pumping
Heavy-Duty Outdoor Performance – Engineered to withstand tough environmental conditions, abrasion, and continuous outdoor use in agricultural and industrial settings
4″ x 30 Metres Green Suction Pipe
- Internal Diameter: 4 inches (100mm)
- Length: 30 Metres per roll
- Material: Virgin PVC (inner tube and outer cover)
- Reinforcement: Rigid PVC spiral helix
- Construction: Three-layer (inner tube, spiral reinforcement, outer cover)
- Pressure Rating: Up to 70 psi working pressure (approx. 4.8 bar)
- Safety Factor: 3:1
- Temperature Range: -5°C to 60°C
- Colour: Green
- Inner Surface: Smooth bore
- Compatible Fittings: Standard 4" pump inlet fittings and camlock couplings
Reviews
There are no reviews yet.